View Full Version : nx system
08-20-2001, 01:52 PM
thinking about putting the nx system on my 98 gt mustang
it has some mod; steeda timming adjuster, underive pullies, h-pipe, 3:73 gears k&n drop in filter. can i get some feed back on this..????
08-20-2001, 07:52 PM
stick with a 150 or lower shot of nitrous if you haven't gone through the internal componets. Look into TNT nitrous they send you a nice high quality "wet" system that will be a little easier on you stang and easier on your budget. Always buy a rev limiter with your NOS system.
08-21-2001, 05:07 PM
whats their web sight if you know it..
08-21-2001, 09:18 PM
The website is:
The price's are a little higher than others but the maintance of this system is 0. I do not own the system,"wish I could". A couple of my buddies have it on their 2000 Z28's. The system is a winner and I highly recommend it.
08-22-2001, 04:01 PM
NX has a system for you 4.6 Mustang! You need better flowing exhaust..IMHO
TNT is a little spendier. But they do make a good system.
NX $579 and the TNT $650
The NX system works the same as the TNT. They both fog the TB with a dense Mixture of N2O and Gasoline.
Yes an Ignition rev limiter, WOT activation switch, 2000rpm window switch and colder running non-Platinum spark plugs are a must.
also a Fuel pressure safety switch- incase the pressure drops to an unsafe level- it shuts off the juice.
If you dont use an RPM activation switch the juice can start to flow at to low of an RPM and cause a BOGG off the line or backfire through the intake. Ive seen it happen to a compucar plate system and it damaged/cracked the air intake tube.
Bang for buck I say NX is the best deal around...
start with the lowest setting and build from there. You may have traction issues.
vBulletin® v3.8.2, Copyright ©2000-2013, Jelsoft Enterprises Ltd.