Two Guys Garage Forum  

Go Back   Two Guys Garage Forum > Your Own Projects

Reply
 
Thread Tools Search this Thread Display Modes
  #1  
Old 08-20-2001, 01:52 PM
walkerkd
Guest
 
Posts: n/a
nx system

thinking about putting the nx system on my 98 gt mustang
it has some mod; steeda timming adjuster, underive pullies, h-pipe, 3:73 gears k&n drop in filter. can i get some feed back on this..????
Reply With Quote
  #2  
Old 08-20-2001, 07:52 PM
wileys_farm
Guest
 
Posts: n/a
stick with a 150 or lower shot of nitrous if you haven't gone through the internal componets. Look into TNT nitrous they send you a nice high quality "wet" system that will be a little easier on you stang and easier on your budget. Always buy a rev limiter with your NOS system.
Reply With Quote
  #3  
Old 08-21-2001, 05:07 PM
walkerkd
Guest
 
Posts: n/a
so

whats their web sight if you know it..
Reply With Quote
  #4  
Old 08-21-2001, 09:18 PM
wileys_farm
Guest
 
Posts: n/a
TNT

The website is:

www.nitrous-power.com

The price's are a little higher than others but the maintance of this system is 0. I do not own the system,"wish I could". A couple of my buddies have it on their 2000 Z28's. The system is a winner and I highly recommend it.
Reply With Quote
  #5  
Old 08-22-2001, 04:01 PM
4DR-SS
Guest
 
Posts: n/a
NX

NX has a system for you 4.6 Mustang! You need better flowing exhaust..IMHO

TNT is a little spendier. But they do make a good system.
NX $579 and the TNT $650

The NX system works the same as the TNT. They both fog the TB with a dense Mixture of N2O and Gasoline.
Yes an Ignition rev limiter, WOT activation switch, 2000rpm window switch and colder running non-Platinum spark plugs are a must.
also a Fuel pressure safety switch- incase the pressure drops to an unsafe level- it shuts off the juice.
If you dont use an RPM activation switch the juice can start to flow at to low of an RPM and cause a BOGG off the line or backfire through the intake. Ive seen it happen to a compucar plate system and it damaged/cracked the air intake tube.

Bang for buck I say NX is the best deal around...
start with the lowest setting and build from there. You may have traction issues.
good luck
Reply With Quote
Reply


Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)
 
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
Tech Thread KA9MOT Your Own Projects 41 10-03-2012 07:18 AM
Tire Pressure Monitoring System Scolagiaco Your Own Projects 2 10-14-2007 06:24 PM
brake system bleeding stan tarnecky Your Own Projects 2 11-10-2003 10:20 AM
How to flush an A/C system???? Zib Your Own Projects 1 08-10-2003 09:06 AM
TNT N2O system 4DR-SS Your Own Projects 11 05-17-2002 07:04 PM


All times are GMT -4. The time now is 01:49 AM.


Powered by vBulletin® Version 3.8.2
Copyright ©2000 - 2013, Jelsoft Enterprises Ltd.
TwoGuysGarage.com © Brenton Productions